HANMATEK SF1 Cable Finder Detector Wall Scanner Detector Multifunctional Stud Finder Wood/Ferrous Metals/Non-Ferrous Metals/Cable

$49.99 AUD

Sale Sold out

Taxes included.

AC Scan Detection

Up to 50 mm/2in;
Multiple detection, the location will be more accurate;
Detection units can be switched for all modes (cm/in/mm).

Exact Mode (Wood)

Up to 20mm/0.8in;
long press to switch exact mode/deep mode.

Depth Mode (Wood)

Up to 38mm/1.5in;
Wood detection mode can detect objects in plaster drywall, plywood sheathing, bare wood flooring, coated wood walls.

Metal Scan Detection

Detects metal up to 120mm/4.7in;
Non-ferrous metals up to 100 mm / 3.94in;
Detection of metal will be displayed on the display with the detection operation synchronized with the detection depth value.

Step 1: Calibration before scanning

Short press the detection mode button, and wait for automatic calibration;
You can choose the detection mode, and detection depth, the instrument defaults to metal mode.

Step 2: Scanning walls

Move the scanner slowly along the wall. Do not lift the instrument or apply additional pressure;
Note: If you shake or lift the instrument carelessly, you need to recalibrate it.

Step 3: Find the center of the target

The progress bar on the screen changes with the distance of the object;
When the signal is full, the indicator light flashes and a ticking sound is emitted, meaning that the center of the object has been found.

Calibration the Tool Correctly

Short press the Power Button, the stud finder automatically enters the metal detection function mode. At this time, if there is a signal display on the display screen without interference, it means that calibration is required.

Note: In AC/Metal mode, put it in the air to calibrate it;

In stud/deep mode, put it on the wall where you want to detect to calibrate it

NOTE:

●Sometimes due to various environmental factors, the stud finder may not be able to calibrate automatically, and a wrong alarm signal may appear, please calibrate manually.

●If the detector has just been calibrated on the wooden stand, you need to move the tool out of the range of the wooden stand and detect the wooden stand again.

● If you are receiving erratic scan results, it may be due to moisture, humidity inside the wall cavity or drywall, or recently applied paint or wallpaper that has not fully dried. While moisture may not always be visible, it can interfere with the tool's sensors. Please allow the walls to dry for a few days.

●For some environmental factors or uneven surfaces, it is difficult to detect wooden nails using the wood studs detection mode. It may be easier to find these items by changing the metal detection mode to locate the nails that hold the material to the wood.

● Depending on the proximity of wires or pipes to the wall, the stud finder can detect them in the same way as wood studs. Care should always be taken when nailing, cutting or drilling holes in walls, floors and ceilings that may contain these items.

Simple and Easy to Use The SFI wall scanner has 4 functions, it is suitable for detecting metal, wood, magnetism, AC cable, can accurately and quickly fix the position of nails, screws, steel rods, wooden beams, AC cables, etc.
Easy to read: the large LCD display is easy to read. The signal strength display area on the display can clearly show the distance to the metal object. The screen can see the scan mode, detection depth, detection signal strength, battery indicator and center point, etc. And the detector can be shut down within 5 minutes without operation.
Self-calibration: the wall detector can be calibrated automatically, simply press the metal detection button. Note: The automatic calibration must be done without nails, AC cable or metal, otherwise the test results will be inaccurate.
The scanner has two functions: acoustic alarm and light indicator. Ergonomically designed, it is very comfortable to hold at any angle; the rubber on the back prevents damage to the wall, which is safe and comfortable.
Application Scenario This wall detector can quickly locate metal and wood AC cables hidden in the walls, floors and ceilings of your home, and help you avoid dangers when installing TVs, cabinets, garage shelves, etc.

› See more product details